COMPANY

Company Name
KEN.DENTALX Co.,Ltd.

Established
1990

President
Kenji Matsuura

Location

Head Office

Dentabldg 4-1-11 Hongo Bunkyo-ku,
Tokyo JAPAN (Zip.113-0033)
Tel. +81-3-6801-8194
Fax. +81-3-6801-8195










Web site
www.kendentalx.com


Greetings from the president


I opened The Matsuura dental prosthesis that is a forerunner of Ken Dentalx Co., Ltd. at 23 years old(December, 1980).

At first I ran the laboratory mainly composed with an attachment of ligid support, the denture which used a stabilizing arm and milling work.

Afterwards I incorporated as a company on May, 1990
and changed the company name to Ken Dentalx Co., Ltd.
The foreseeability of the implant rises year by year in those days, too, it was becoming an invariable cure as loss prosthesis.

With the situation, frequency to make a superstructure increased, but Then with the increase of the kind of the implant, various technique came to be required as for the manufacture method screw fixation, the cementation and so on.

Fortunately, I was able to make use of welding technique of milling work and attachment which performed since the opening of business in an implant artisan.

Compared to general manufacture,the manufacture of the implant superstructure is so hard to make it for dental technician.because it is necessary that dental technician have a variety of knowledge and the implant superstructure require high accuracy.

However, we have become evaluated as the dental laboratory which specialized in an implant superstructure by now.

All the employees and I will study an implant artisan in future.
Your continued support will be greatly appreciated.

Kenji Matsuura
President

Ken Dentalx Co., Ltd.

President Kenji Matsuura


President profile

1956
Born in Tokyo

1978
Dental Professional Training College attached to The Nippon Dental University Graduation at 9 terms (The Nippon Dental University College at Tokyo)

1989
Established Matsuura dental prosthesis (matsuura shika hotetsu) 
Winning Silver prize on International Congress of Dental Tecnology Technical Contest

1990
Established Ken Dentalx Co., Ltd.

1994
Certified instructor of ITI Dental Implant (Switzerland)
Certified instructor of CENDRES & METAUX Attachments (Switzerland)

1995
Certified instructor of CALCITEK implant (USA)


1997
Certified lifetime Training Instructor of Japan Dental Technologists Association (JDTA)

2002
German WIELAND AGC Master Instructor

2003
KaVo CADCAM system Master laboratory

2003
April inaugurated as the teacher of The Nippon Dental University College at Tokyo dental technology course

Client (listed in random order)

  • Nobel Biocare Japan K.K.
  • Straumann Japan K.K.
  • Astra Tech
  • HAKUHO CORPORATION
  • IMPLATEX CO., Ltd.
  • KYOCERA Corporation
  • ADVANCE CO., LTD.
  • KaVo Dental Systems Japan Co., Ltd.
  • DAISHIN TRADING CO.,LTD.
  • Dentsply-Sankin K.K.
  • GC

Achievements of Implant production

20066,300units
20078,700units
200810,900units
200913,600units
201017,100units
201120,000units

Paper / Article

Quintessence Publishing

QDT

  • Kenji Matsuura
  • Facture of a precise stabilizeing arm in the attachment work.
    QDT 1990;Vol15 No5:38~44.
  • chrome‐cobalt high Precision casting system of Master Piece, heraeus.
    QDT 1993;18(3):4-5.
  • DIGITAL DENTAL VIEW. DIGITAL DENTAL PRESENTATION.
    QDT 1997;23(1):102-105.
  • DIGITAL DENTAL VIEW. SOHO Network Computing. 
    QDT 1997;23(2):70-71.

  • Shouji Hayashi
  • Makoto Shiota
  • Isamu Saito
  • Kenji Matsuura
Special Meeting
  • Possibility of the clinical application of the electroforming.
    QDT 2002;27(10):46-75.

QDT Commentary

  • Kenji Matsuura
  • Semsch Rainer: Implant-supported bar-latch overdenture – Riegel equipment and Electroforming to apply to retainer
    - QDT 2003;28(4):19.
  • Kurbad A.Reichel K. ; CAD/CAM production for all ceramic inner cap
    - all purpose fabrication technique without special software
    - QDT 2003;28(10):63-75.

a separate volume

  • Kenji Matsuura
  • Investing method for attachment denture base resin
    - a point of denture packing thermal polymerize resin
    - In: separate volume of QDT the world of denture base resin : Tokyo
    Quintessence Publishing 1991.110-111.
  • An approach of side screw on super strucuture; In: separate volume of QDT trend of dental technological works 1998, 97 QDT symposium : Tokyo Quintessence Publishing 1991.104-108.

  • Kenji Matsuura
  • Makoto Shiota
  • application to the implnat cace of the upper edentulous jaw in electroforming and telescope crown.In: separate volume of QDT current Implant superstructure Part 3 : Tokyo Quintessence Publishing 2002.186.

  • Toru Suzuki
  • Kenji Matsuura
  • basic of bridge production In: separate volume of QDT no failure metal ceramics :Tokyo Quintessence Publishing 2003.59.

Ishiyaku Pub

  • The international journal of Dental Technology 13-7(1985)
    Forum: the most suprising thing after graduation and impression of the attitude of learning great knowledge and skill.
  • The international journal of Dental Technology 19-3(1991)
    feature articles: reconsideration of rigid conecting and attachment
    - a design and dental technic of stabilizing arm (volume one)-
  • The international journal of Dental Technology 19-4(1991)
    feature articles: reconsideration of rigid conecting and attachment
    - a design and dental technic of stabilizing arm (volume two)-
  • The international journal of Dental Technology 21-3(1993)
    good the dental technical room Functional layout
  • Separate volume of The international journal of Dental Technology (1995)
    How to choose, how to use articulator judging from a case.
  • Separate volume of The international journal of Dental Technology (1997)
    GEAR selection for discerning laboratories.
  • Separate volume of The international journal of Dental Technology (1999)
    Dental Implant today
  • Engineering dental clinical training skills course Vol.4 (1998)
  • The international journal of Dental Technology 29-1(2001)
    New year feature articles: Laboratory management to succeed in the 21st century (first part).
    - Requirements of the management to extend the laboratory for ask the manager of four laboratories –
    Part 1.Owner&Labo Profile “The laboratory introduction that the feelings of the owner were reflected”
    The middle scale laboratory which arrived at the current style with the trial and error that repeated the change
  • The international journal of Dental Technology 29-3(2001)
    feature articles: Laboratory management to succeed in the 21st century (second part).
    Theme 1: Effective process, quality control
    Theme 2: An employee evaluation and employee education
    Theme 3: Accounting duties
    Theme 4: New action in line with the times
    Theme 5: Communication with a chair side and the patient
  • The international journal of Dental Technology 35-7(2007)
    special articles: Cutting it from CAD/CAM IDS 2007

Japan Dental technologists association (JDTA) bulletin

  • Technical interview (May, June issue 1998)
    “Super structure in CALCITEK IMPLANT SYSTEM”
  • Technical interview (Sep issue 2000)
    “Extracoronal attachment of a new concept”
  • Review (Oct 2001)
    IT innovation and dental laboratory techniques Part2 – Usage of the computer in the dental laboratory –

Dental Diamond

  • Kenji Matsuura
  • Latest CAD/CAM circumstances and medical practice – Summary of the system, Characteristic and Adaptation case –
    A characteristic and indication of each system CAD/CAM Everest. The Thirty Volume No.16 Dec, 2005:43-46